Audio villasets

PANEL OPTIONS  

System 200, without access control

System 200, with keypad

System 200, with fob reader

These 3 options are available with 4 panel styles (see below). We show the common 1 and 2 button sets, but panels can be built with over 20 buttons. 

System 200 wiring

A1

A modular panel with two buttons, in anodised aluminium. Indicators for hard of hearing show the call state.

Audio intercoms are wired in alarm or Cat5 cable.  

WIRE A -  a Cat5 is sufficient for a single button door panel with a keypad. The lock release relay is built into the PSU, so only low current runs to the panel.

WIRE B - The handsets use three common cores, plus 1 for call tone per apartment.  Run a separate cable for each handset, or an 8 core cable per group of 5 handsets.

WIRE C - this should be rated to suit the lock. We recommend at least 1mm. Check the power rating of the power supply is sufficient for the lock.

Panel styles

The four main styles are MTM modular or VR stainless.

Some older styles are still available using 'System 200' wiring. Thangram panels have a standard audio or video core, with optional keypad module or additional buttons. 

Targha panels are available in standard or vandal resistant form. They too have keypad options or multi-user buttons.

MTM

MTM panels are modular. The frame size is for 1, 2 , or 3 modules.

Standard panel amd frame finish is natural anodised aluminium.

The frame can fit in a surface housing, or fit to a flushed in wall box. 

MTM VR

The MTM VR panels are still modular, but made more vandal resistant fitting into a thicker module frame.

Parts are cast in Zamak, a recycled aluminium, then finished in black.

The frame can fit in a black surface housing, or fit to a flushed in wall box. 

VRW

VRW and VRM panels are made as a one piece stainless steel panel to fit into standard sizes. 

VRW have standard call buttons with name plate windows.

VRM panels have vandal resistant call buttons without nameplates.