GSM villasets

PANEL OPTIONS  

GSM without access control

GSM with keypad

GSM with fob reader

These 3 options are available with 4 panel styles (see below). We show the common 1 and 2 button sets, but panels can be built with over 20 buttons. 

GSM wiring

Before fitting a GSM intercom, be sure there is good reception with the service provider chosen. You can use 2G and above. We do not recommend service provider '3'. 

The modular panels look the same as  system 200 audio. Indicators for hard of hearing show the call state.

The benefit of GSM is there is no need for a cable from the house to the gate.  Unfortunately, rural locations where drives are longest have the worst reception.  

WIRE B - The power supply needs a 2 core cable 1mm. 

WIRE C - this should be rated to suit the lock. We recommend at least 1mm. Check the power rating of the power supply is sufficient for the lock

Set the antenna high up for best reception, especially near steel gates, railings, or chain link fencing.

Panel styles

The only GSM are MTM and MTMVR modular or VRW / VRM stainless steel panels.

There is a wall mounting back box for flush mounting, or a surface housing for each panel option.

MTM

MTM panels are modular. The frame size is for 1, 2 , or 3 modules.

Standard panel amd frame finish is natural anodised aluminium.

MTM VR

The MTM VR panels are still modular, but made more vandal resistant fitting into a thicker module frame.

Parts are cast in Zamak, a recycled aluminium, then finished in black.

VRW

VRW have standard call buttons with name plate windows. VRM panels have vandal resistant call buttons.

Both are single piece stainless steel panels to fit standard size housings.